What is the most expensive car that he can afford to buy? 2-door coupe 4-door hatchback compact sedan compact suv

Answers

Answer 1

The most expensive car he can afford to buy is a 4-door hatchback. He can spend $24,000. However, sales tax levied will be 6%. 6% of $24,000 = $1,440. He will be left with a balance amount of $22,560.
This indicates that the actual amount he has to spend on a car is $22,560

The 4- door hatchback is priced at $22,500, which is only little more pricey  than the $22,560 he must pay after sales duty. The most  expensive vehicle he can go is this one, as all other vehicles cost significantly  further than $22,560.

To know more about 4- door hatchback :
https://brainly.com/question/15104130

#SPJ4


Related Questions

which one of the following is not an example of the prevention costs of quality? group of answer choices costs associated with improving process design. procuring higher quality materials from suppliers to reduce defects. costs associated with honoring product returns and warranty claims. training all new employees in standard operating procedures.

Answers

End-process sampling is not an example of the prevention costs of quality.

Prevention costs are incurred to prevent product defects from occurring, and are part of the cost of quality. Prevention costs  includes employee training with supplier certification. Generally, the greatest improvement in product quality is related to defect prevention. Although such prevention results in additional costs, such costs are usually more than offset by the savings associated with reduced damage.

Historically, it was believed that the total cost of quality (prevention, evaluation, internal failure, and external failure) would be minimized at some non-zero cost. However, this belief has been replaced by one that advocates a harmless policy. This new belief is based on the fact that small increases in prevention rates often result in significant decreases in failure rates.

For more such questions on prevention costs of quality:

https://brainly.com/question/28332501

#SPJ4

What are the 3 conditions for making a causal inference?

Answers

Covariation, temporal precedence, and control over "third variables" are the three prerequisites for causality. The latter include different theories to account for the detected causal link.

What are the three criteria for determining Covariation?

You must demonstrate three things in order to establish causality: that X occurred before Y; that the observed association between X and Y wasn't the result of pure chance; and that there is no other explanation for the relationship between X and Y.What are the three requirements for internal validity inference?

Three conditions must be met in order for a causal inference to be considered valid: the "cause" must occur before the "effect" in time (temporal precedence); the "cause" and the "effect" tend to occur together; and there must be no convincing alternate explanations for the observed covariation (nonspuriousness).

Learn more about Covariation here:

https://brainly.com/question/2618552

#SPJ4

What are the 4 common classification of vehicle?

Answers

The four common classifications of vehicles are personal, commercial, off-road, and recreational. Passenger vehicles are designed for everyday use and include cars, minivans and SUVs.

Commercial vehicles are typically used for commercial purposes and include vans, garbage trucks, and tow trucks. All-terrain vehicles are designed for off-road terrain and include ATVs, snowmobiles, and motocross bikes. Recreational vehicles are intended for leisure activities and include motorhomes, camper trailers, and boats.

All these vehicles are classified based on their intended purpose. Passenger cars are intended for everyday use, utility vehicles are intended for companies, off-road vehicles are intended for off-road use, and recreational vehicles are intended for leisure activities.

To know more about vehicles click here

https://brainly.com/question/24745369

#SPJ4

What is the difference between FICA and federal tax?

Answers

Based on how you fill out your W-4, or Employees Withholding Allowance Certificate, federal income tax is computed. FICA, often known as the Federal Insurance Contributions Act, is composed of two taxes: OASDI and Medicare. These taxes are determined at a fixed rate of 7.65% and go toward social security and Medicare.

The Social Security and Medicare federal programs, which offer benefits to retirees, individuals with disabilities, and offspring of deceased workers, are funded by contributions from both employees and employers under the Federal Insurance Contributions Act. Title 26, Subtitle C, Chapter 21 of the United States Code contains the tax legislation known as the Federal Insurance Contributions Act. Medicare offers hospital insurance coverage for seniors; Social Security benefits include old-age, survivors, and disability insurance (OASDI). The amount of payroll taxes one pays over the course of their working career is indirectly related to the annuity amount they would get from social security once they retire. As a result, Kevin Hassett claimed that because FICA is directly related to benefits that one is qualified to receive later in life, it is not a tax. Though no one has an earned property right to benefits from the system, regardless of how much they may have contributed, the United States Supreme Court declared in Flemming v. Nestor (1960) that the Social Security system is neither a pension nor an insurance program. FICA functions as a tax in all actuality since money is set aside by Congress for specific purposes but is still entirely under its control, including the ability to be redirected. Only earned income is subject to the FICA tax; investment income, such as rental income, interest income, or dividend income, is not subject to this tax. Healthcare Insurance (HI)

Learn more about FICA here

https://brainly.com/question/15183057

#SPJ4

What is CO2 used for in manufacturing?

Answers

Carbon dioxide ( chemical formula CO2) is a chemical compound made up of molecules that each have one carbon atom covalently double bonded to two oxygen atoms.

How is CO2 used?

The CO2 produced can then be sold to industries that require it. Carbon dioxide is also released into the atmosphere naturally when organisms respire or decompose, carbonate rocks weather, deforestation and forest fires occur, and volcanoes erupt.

Carbon dioxide is also used in the food industry.

It is an essential component in food supply chains because it is used to humanely stun animals before slaughter and in vacuum-pack products such as bread to extend their shelf life.

Animals are essentially knocked out before slaughter by being given high concentrations of the gas, which causes a loss of consciousness and is thought to be around 70% to 90% concentrated in the air.

To learn more about Carbon dioxide refer to:

https://brainly.com/question/13202738

#SPJ4

bakery a sells bread for $2 per loaf that costs $0.80 per loaf to make. bakery a gives a 70% discount for its bread at the end of the day. what is the critical ratio?

Answers

The critical ratio in this scenario is the ratio between the cost of producing the bread ($0.80 per loaf) and the discounted price of the bread ($0.60 per loaf). This ratio is equal to 4:3, or 1.33.

This ratio is important because it shows the profitability of the bakery. By offering a 70% discount, the bakery is able to sell bread for $0.60 per loaf, which is $0.20 less than what it cost to produce the bread. This means that the bakery is able to make a profit of $0.20 for every loaf of bread sold.

However, this ratio can also be used to determine the minimum price the bakery must charge for its bread in order to make a profit. By dividing the cost of producing the bread ($0.80) by the critical ratio (1.33), the minimum price the bakery must charge for its bread is $0.60 per loaf. This means that the bakery must charge at least $0.60 in order to make a profit.

For more questions like Critical ratio click the link below:

https://brainly.com/question/29574348

#SPJ4

Tickets to a play cost $4 in advance and $5 at the door. The theater club wants to raise at least $400 from the ticket sales. Write an inequality for the number of tickets in advance, x, and the number of tickets at the door, y, that the theater club needs to sell. If the club sells 40 tickets in advance, what is the least number of tickets they need to sell at the door to reach their goal?.

Answers

As per the given inequality, the least number of tickets they need to sell at the door to reach their goal is 48.

Here we have given that Tickets to a play cost $4 in advance and $5 at the door. The theater club wants to raise at least $400 from the ticket sales and we need to find the the least number of tickets they need to sell at the door to reach their goal

While we looking into the given question, we have knw that there are two types of ticket 5 and 4.

So, here le us consider that the number of door tickets = x and the number of advance tickets = y which is 40

Then we have to create a system of equations as

=> 5x + 4y ≥ 400 - - - - - - - - (1)

Apply the value of y as 40, then we get

=> 5x + 4(40) ≥ 400

=> 5x + 160 ≥ 400

When we simplify this one then we get,

=> 5x ≥ 400 - 160

=> 5x ≥ 240

Divide both side by 5, then we get

=> x ≥ 48

So, here they need to sell 48 tickets at the door.

To know more about inequality here

https://brainly.com/question/17068081

#SPJ4

The five broad categories of BI/analytics techniques include
a. heuristics, predictive analytics, simulation, data mining, and linear programming b. optimization, descriptive analytics, and text and video analysis, simulation, and predictive analytics c. regression analysis, data mining, Monte Carlo simulation, optimization, and time series analysis d. predictive analysis scenario analysis, image analysis, optimization, and regression analysis

Answers

The five broad categories of BI/analytics techniques include a. heuristics, predictive analytics, simulation, data mining, and linear programming

What are the five broad categories of BI/analytics techniques?

Heuristics are methods for solving problems that involve using general rules of thumb or common sense, rather than precise or rigorous methods. Predictive analytics is the use of data, statistical algorithms, and machine learning techniques to identify patterns and trends in data, and to make predictions about future events.

Simulation is the use of computer models to represent and analyze real-world systems or processes. Data mining is the process of extracting useful information from large sets of data using statistical and machine learning techniques.

Linear programming is a mathematical method for optimizing a linear objective function, subject to linear constraints. It is often used in business and economics to solve problems related to resource allocation and decision-making.

Find out more on analytics techniques at https://brainly.com/question/13220961

#SPJ1

What are the 4 economic groups?

Answers

Answer: business groups, labor groups, agricultural groups, and professional associations

Explanation:

How does a development team knows when a backlog item is done?

Answers

The team as a whole decides what constitutes done, which will be used to categorize all "finished" Product Backlog items.

What is Product backlog?

In agile project management, a product backlog is a prioritized list of the features a product should contain.

In the agile software development paradigm, it is referred to as a "artifact" and is commonly called a "to-do list."

The product backlog is known by several names in various project management frameworks, including product backlog in scrum, work item list in disciplined agile, and option pool in lean.

Within the scrum paradigm, the product owner is involved in both the initial creation and continuous maintenance of the product backlog.

The items from the product backlog that have been selected for development during a given sprint make up the sprint backlog.

Learn more about product backlog, here

https://brainly.com/question/14587191

#SPJ4

How do we calculate cost of production?

Answers

Total production expense/ cost of production = Expense of labor + Cost of raw materials, often known as manufacturing overhead costs.

What is the average cost of production?

When a company produces a something or provides a service, its average cost of production is the price it pays per unit. Costs associated with production may include labor, raw materials, or consumable supplies. The costs paid to acquire the factors of production—such as labor, land, and capital—necessary for a product's manufacture are referred to as the cost of production in economics. A motor vehicle tyres, for instance, may include production costs that cover the cost of rubber, labor to make the product, and numerous manufacturing supplies. The material costs of providing the service, as well as the labor expenses paid to staff tasked with doing so, may be included in the costs of production in the service sector.

To know more about cost of production visit:

brainly.com/question/15235684

#SPJ4

Because of the electoral college, presidential candidates generally spend most of their time and resources in ______.

Answers

Because of the Electoral College, presidential candidates generally spend most of their time and resources in battleground states. Hence, the correct answer is battleground states.

These are the states that are considered to be closely contested in the election and could potentially swing either way. Candidates will often focus their attention on these states, as they can have a significant impact on the outcome of the election. By doing so, they can maximize their chances of winning the election by targeting their resources to where they are most likely to make a difference.

Hence, battleground states is the correct option to be filled in blank.

To know more about battleground states here

https://brainly.com/question/29039851

#SPJ4

Is there any closed economy?

Answers

No, there is not. There are no closed economies which exist today.

It is unfeasible in modern society to assist a closed economy because the raw materials, such as crude oil, play a essential role as inputs to the final products. Most countries clearly do not have raw materials and are compulsory to import those commodities.

What is the most closed economy country?

The most closed economy in the world is Brazil, which it imports the least amount of goods in the world if restrained as a portion of the gross domestic product (GDP). Actually, there are no economies which are completely closed, but some countries use protectionist rules to restrict trade, making them more closed than others.

India was also essentially a closed economy. Its large but inefficient industrial sector contributed 95 percent of domestic order for manufactured goods and 100 percent of all consumer goods, as a 1989 World Bank report stated.

Learn more about closed economy at: https://brainly.com/question/10074981

#SPJ4

Do we use == in pseudocode?

Answers

The symbols == and!= denote if something is equal or not. A variable is 0 negative when it has a minus sign before it.

A variable is something that can take on a variety of different values. A variable is a symbol. A variable in an experiment is something that can be changed.  Because their values are studied during an experiment under the presumption or condition that they are dependent on the values of other variables according to a law or rule, they are known as dependent variables. In the context of the experiment in question, independent variables are those that are not considered as dependent on any other factors. Time, space, density, mass, fluid flow rate, and historical values of any observed parameter are examples of common independent variables.

Learn more about variable from

brainly.com/question/82796

#SPJ4

The symbols == and!= denote if something is equal or not. A variable is 0 negative when it has a minus sign before it.

A variable is something that can take on a variety of different values. A variable is a symbol. A variable in an experiment is something that can be changed.  Because their values are studied during an experiment under the presumption or condition that they are dependent on the values of other variables according to a law or rule, they are known as dependent variables. In the context of the experiment in question, independent variables are those that are not considered as dependent on any other factors. Time, space, density, mass, fluid flow rate, and historical values of any observed parameter are examples of common independent variables.

Learn more about variable from

brainly.com/question/82796

#SPJ4

if an insurance company encourages its salespeople to intentionally mislead potential customers about damage from flooding due to hurricane damage, who could be susceptible to legal action for the deceptive practice?

Answers

Legal action for the fraudulent practise may be available against the company and the salesperson.

What are the different categories of insurance frauds ?Because it is a highly obvious and particular type of robbery, insurance fraud is a serious scam. Any step of the process, from looking for an insurance agent to submitting an insurance claim, can result in insurance fraud, and it can happen to any of the persons involved. These parties comprise the applicants, third-party claimants, policyholders, insurance brokers, those who help claimants with their needs, and in some situations, even the insurance companies themselves.By checking and making sure that you work with certified insurance brokers, you may protect yourself from such frauds. Before you send them any money, look into their previous clients and background. Regularly review your policy to ensure that the information is accurate and unaltered. As you get older, it's critical to manage your insurance plans carefully and safely.

To learn more about insurance refer :

https://brainly.com/question/26285319

#SPJ4

What is the similarities between data life cycle and data analysis process?

Answers

The similarities between the data life cycle and the data analysis are as follows are both are concerned with examination of data, both are data science processes and both have a goal to draw inferences based on the given data set.

The process by which specific data moves from creation or collection to storage and/or deletion at the end of its useful life is known as data lifecycle. Since the rise of big data and the continued growth of the Internet of Things, data lifecycle management (DLM) has become important.

Globally, more and more gadgets generate huge amounts of data. It is important to maintain proper control over the data throughout its life cycle to maximize the value of the data and reduce the risk of errors. Finally, expired data should be archived or deleted to prevent it from using more resources than necessary.

To know more about Data life cycle here-

https://brainly.com/question/26952504

#SPJ4

What do you mean by purchasing parity?

Answers

The rate at which the equivalent amount of products and services might be purchased in one nation using the currency of the other at a certain exchange rate.

What do you mean by purchasing parity?

The term "purchasing power parity," or PPP, refers to the relative buying power of different national currencies throughout the world. To put it another way, the idea behind buying power parity is that every nations' exchange rates should be equal so that consumers may pay the same price for the same amount of products and services everywhere in the world.

One of the most crucial macroeconomic indicators used by economists to assess a nation's economic output and level of life is the purchasing power parity.

To know more about purchasing parity, visit:

https://brainly.com/question/28199500

#SPJ4

What is called event planning?

Answers

The process of planning and coordinating the event is usually referred to as event planning and which can include budgeting, scheduling, site selection, acquiring necessary permits.

The project management approach may be used to build and develop events like festivals, conferences, ceremonies, marriages, formal parties, concerts, or conventions on a small-scale or large-scale. Prior to the event's launch, it requires investigating the brand, figuring out who its target market is, coming up with an event concept, and setting up the technical elements.

The events industry currently encompasses events of all sizes, from the Olympics to business breakfast meetings. A number of companies, celebrities, organisations, and interest groups host events to market their brands, build commercial relationships, raise money, or honour achievements. The process of organising the event is sometimes referred to as event planning, and it may involve decisions on a budget, a schedule, a site, and the acquisition of necessary permits.

learn more about event planning here

https://brainly.com/question/15297643

#SPJ4

because short-term interest rates are much more volatile than long-term rates, you would, in the real world, generally be subject to much more price risk if you purchased a 30-day bond than if you bought a 30-year bond. because short-term interest rates are much more volatile than long-term rates, you would, in the real world, generally be subject to much more price risk if you purchased a 30-day bond than if you bought a 30-year bond. false true

Answers

It is untrue to say that buying a 30-day bond will cost you less than buying a 30-year bond.

What is the cost of the item?

The sum an entrepreneur pays for an interest is referred to as the purchase price, and that amount has become the lender's cost basis for determining profit or loss when the investment is sold.

Briefing:

Long-term interest rate increases are more likely to occur than short-term ones. As a result, long-term interest rates fluctuate more than short-term ones.

The cost of bonds falls as the interest rates go up. Additionally, the danger of rising interest rates rises as bond maturities lengthen. As a reason, long-term bonds will be riskier than short-term bonds.

As a result, the claim is untrue.

To know more about Purchased visit:

https://brainly.com/question/24112214

#SPJ4

What are the 3 types of stakeholder participation?

Answers

The three categories of stakeholder engagement are consultation, information, and participation.

A conference or meeting when ideas are discussed or suggestions are given is referred to as a consultation. You might wish to contact with another doctor before consuming the proscribed fruit if one indicates your severe blueberry allergy has been resolved. . to convince them to comply with your requests. to decide how you will both behave, form a plan of action, a proposal, or promote a case jointly. Generally speaking, consulting positions may be classified into one of five major groups: strategy consulting, operations consulting, financial consulting, information technology consulting, and human resources consulting. Identification of the problem, analysis of the problem, application of the remedy, and assessment of the treatment are the four steps of problem-solving consultation. Baseline data are gathered throughout these phases, which also result in the development, execution, and evaluation of an intervention plan that is guided by the assessment.

learn more about consultation here

https://brainly.com/question/29342787

#SPJ4

What are the 2 most common types of bank accounts?

Answers

When it comes to banking, there are two main types of accounts: savings and checking accounts.

A savings account is designed to help individuals save money and earn interest, while a checking account is designed to help individuals manage their money on a daily basis.

Savings accounts are a type of bank account that typically offer higher interest rates than checking accounts, but come with certain restrictions, such as minimum balance requirements and limited access to funds.

Checking accounts, on the other hand, allow for more flexibility and access to funds, but typically offer lower interest rates. Deciding which type of account is best for you depends on your individual needs and goals.

To learn more about bank, click here:

https://brainly.com/question/25642105

#SPJ4

The A machine have an hourly operating cot of $10 each, B machine have an hourly operating cot of $11 each, and C machine have an hourly operating cot of $12 each. Which alternative would be elected, and how many machine, in order to minimize total cot while atifying capacity proceing requirement?

Answers

In order to minimize total cost while satisfying capacity processing requirement, the alternative that should be elected is a combination of A and B machines.

What is total cost?

Total cost is the sum of all the costs associated with a purchase, project, or undertaking. This includes the cost of the materials, labor, overhead, taxes, and any other related expenses. Calculating total cost can help businesses make informed decisions about their spending and ensure that they are making investments that are cost-effective and beneficial to their bottom line. Total cost also helps individuals make decisions about their own spending, such as when deciding whether to make a purchase or if they can afford a certain item. For example, if a person is considering buying a car, they would need to calculate the total cost of the car, including taxes, registration fees, insurance, financing, and maintenance. Knowing the total cost can help them decide if the purchase is within their budget.

The total cost of using A and B machines would be $21 ($10 for A and $11 for B). The cost of using C machines would be $12, but since C machines have a higher operating cost than the other two machines, the cost of using C machines would be higher than using A and B machines to satisfy the capacity processing requirement. Therefore, using a combination of A and B machines would be the best choice in order to minimize total cot while satisfying capacity processing requirement.

To learn more about total cost
https://brainly.com/question/26171624
#SPJ4

What makes a good backlog refinement session?

Answers

During the backlog refinement, you prefer to be positive a few key factors get tackled: Estimate the memories the use of story factors or T-shirt sizing.

Acceptance Criteria - Establish clear and measurable Acceptance Criteria for each User Story. Each consumer story have to absolutely convey the enterprise value.

What is the major objective for backlog refinement session?

The intent of backlog refinement is to make certain that the backlog remains populated with objects that are relevant, distinct and estimated to a degree suitable with their priority, and in keeping with contemporary grasp of the undertaking or product and its objectives

Ongoing Product Backlog Refinement (PBR) is wished inside every Sprint to refine gadgets to be prepared for future Sprints. Key things to do of PBR are (1) splitting massive items, (2) clarifying objects until equipped for implementation except in addition “what” questions, and (3) estimating size, “value”, risks, and so forth.

Learn more about backlog refinement session here:

https://brainly.com/question/14789393#SPJ4

"If nominal GDP is less than real GDP, then the price level must have fallen during the year." (Agree or Disagree)

Answers

If nominal GDP is less than real GDP, then the price level must have fallen during the year, agree.

So when the nominal GDP is less than the real GDP, a positive difference in nominal minus real GDP signifies inflation and so a negative difference tend to signify the deflation. Thus, inflation occurs when nominal GDP is higher than real GDP.

However, the deflation occurs when real GDP is higher than nominal GDP. So, yes, it is possible that in the same year, nominal GDP can be less than the real GDP. This is possible if prices in current year are less than the prices in the base year.

Hence, an increase in nominal GDP means that the prices have also increased.

To learn more about Real GDP here:

https://brainly.com/question/15171681

#SPJ4

morgan wants to have a new roof built. she has contacted three companies. all companies have very similar prices in terms of labor and materials. company 1 offered a material loading percentage of 68%. company 2 offered a percentage of 54%. and company 3 offered a percentage of 38%. which one should morgan choose?

Answers

Company 3, Because if the labor and materials are the same for all three, then she needs to find the company with the lowest material loading percentage in order to get the most affordable price.

What is a material percentage?A portion of the basis is used to establish the materiality threshold. Net income (earnings / profits) is the auditing standard used as a foundation. Most often, percentages fall between 5 and 10 percent (for instance, a sum under 5% is insignificant, over 10% is material, and between 5 and 10% demands discretion).Planned manufacturing overhead divided by 100 equals budgeted direct material cost. Budgeted direct material cost = (budgeted manufacturing overhead 100).The formula is (actual quantity utilized standard price) (standard quantity permitted standard price) to determine a direct materials efficiency variance.If the material margin percentage is higher than 40%, you usually have enough margin to be profitable even with a complicated cost structure, and there may be room to increase your bottom line even further.

Learn more about direct material cost refer to :

https://brainly.com/question/26245657

#SPJ4

Which resource planning tool provides information on resource responsibility and accountability?

Answers

A resource planning tool that provides information on resource responsibility and accountability is a Responsibility Assignment Matrix (RAM).

A RAM is a project management tool that is used to define the roles and responsibilities of team members and other stakeholders in relation to specific tasks or deliverables.

It typically includes a list of tasks or deliverables, along with the names of the individuals or groups responsible for completing each one. This can help to clarify who is responsible for each aspect of the project and ensure that everyone understands their roles and responsibilities.

A RAM can also help to identify any potential conflicts or overlaps in responsibilities and ensure that all resources are being used effectively and efficiently.

Learn more about resource planning tools at

https://brainly.com/question/15714876?referrer=searchResults

#SPJ4

Sometimes the producer of a product owns the businesses that supply them with raw goods to make that product and own the stores that sell that product. This situation may best be called.

Answers

In some cases, the companies that manufacture a product's basic materials and own the retail outlets where it is sold are owned by the same company. Vertical integration is a better term to describe this circumstance. The right answer is C.

Being able to sell your products and provide your own firm with the raw materials needed to make your finished goods is advantageous. This company has the ability to control the pricing. Vertical integration is the term used for this. Vertical integration is a tactic that enables a business to streamline operations by directly controlling different stages of the production process instead of depending on outside suppliers or contractors. Vertical integration entails buying out or expanding one or more critical components of a business's production or supply chain. Vertical integration is demonstrated by Netflix, which switched from licensoring programmes and films from large studios to creating its own unique content.

Sometimes the producer of a product owns the businesses that supply them with raw goods to make that product AND own the stores that sell that product. This situation may best be called

A) laissez-faire.

B) supply and demand.

C) vertical integration.

D) horizontal integration.

To learn more on vertical integration, visit:

https://brainly.com/question/11820020

#SPJ4

If a rights offer is used as the means of funding a positive net present value project, then shareholders should expect the price of their shares to?

Answers

If a rights offer is used as a means of funding a positive net present value project, then shareholders should expect the price of their share to increase due to the increased value of the issuing firm.

A rights offering (rights issue) is a set of subscription warrants that are made available to current shareholders in an amount corresponding to their current ownership. These are regarded as a sort of option since they provide stockholders of a firm the opportunity, but not the duty, to buy additional shares of the business.

The subscription price at which each share may be purchased in a rights offering is often lowered in relation to the current market price. As just an outcome, the holder can often sell their privileges on the market.

To learn more about right offering link is here

brainly.com/question/28497545

#SPJ4

The right question is:

If a rights offer is used as a means of funding a positive net present value project, then shareholders should expect the price of their share to:

(a) remain constant as the value of the project will be offset by the issuance of the new shares

(b) decrease due to the additional shares being offered

(c) change but the directions of that change cannot be predicted

(d) change in direct relation to the change in the book value per share

(e) increase due to the increased value of the issuing firm

the main reason that reits exist is to: ch21 a. create a tax loophole for wealthy investors b. allow shopping center owners to sell their properties in a down market c. make life complicated d. encourage capital formation within the real estate industry e. allow stock promoters to sell a real estate product with high commissions

Answers

The goal of a REIT, or real estate investment trust, is to direct money into the real estate market for the benefit of investors and capital growth.

Why do you use the word "shopping"?

A client interacts in shop when they examine the products or services offered by one or more merchants with the possibility to buy a satisfactory selection of them.

Is buying things a life skill?

Students often part in shopping for food activities in capacity building classes. A vital life skill to impart is the ability to shop. And the grocery store is where most folks do their main shopping.

To know more about Shopping visit:

https://brainly.com/question/14058717

#SPJ4

Why should an entrepreneur always keep improving his product service?

Answers

An entrepreneur should constantly look for methods to improve his product services in order to attract more clients. For a business to expand, it is crucial to create new goods and services.

What is marketing?

The term marketing refers to the actions a company takes to promote the acquisition or sale of a good or service. Delivering goods to clients or other companies involves marketing initiatives like sales and promotion. On occasion, affiliates will handle marketing for a company. Marketing and promotion staff members work to use advertising to catch the attention of important target markets. Aiming at certain audiences, promotions can include celebrity endorsements, catchy slogans or taglines, attractive packaging or graphic designs, and widespread media exposure.

To know more about Marketing visit:  

brainly.com/question/29775565          

#SPJ4

Other Questions
What is the best definition of corporate? question content area the following lots of commodity z were available for sale during the year. line item description units and cost beginning inventory 8 units at $51 first purchase 19 units at $54 second purchase 50 units at $56 third purchase 13 units at $64 the firm uses the periodic inventory system, and there are 25 units of the commodity on hand at the end of the year. what is the ending inventory balance of commodity z using lifo? [Child Psychology, short answer]According to longitudinal and experimental studies, what effects does lower-quality sleep have on children? rollincoast incorporated issued bbb bonds two years ago that provided a yield to maturity of 11.5 percent. long-term risk-free government bonds were yielding 8.7 percent at that time. the current risk premium on bbb bonds versus government bonds is half what it was two years ago. if the risk-free long-term governments are currently yielding 7.8 percent, then at what rate should rollincoast expect to issue new bonds? What is demand-pull inflation and what is done to fix it? Which agile framework breaks workload into? What are 3 good reasons to have a savings account? Write down the code which remove the smallest element from the set, s. Assume the set is not empty. bonjour definition in english What does Steinbeck foreshadow in Chapter 2? A researcher compares two compounds (1 and 2) used in the manufacture of car tires that are designed to reduce braking distances for SUVs equipped with the tires. The mean braking distance for SUVs equipped with tires made with compound 1 is 41 feet, with a population standard deviation of 12.1. The mean braking distance for SUVs equipped with tires made with compound 2 is 46 feet, with a population standard deviation of 9.0. Suppose that a sample of 66 braking tests are performed for each compound. Using these results, test the claim that the braking distance for SUVs equipped with tires using compound 1 is shorter than the braking distance when compound 2 is used. Let 1 be the true mean braking distance corresponding to compound 1 and 2 be the true mean braking distance corresponding to compound 2. Use the 0.05 level of significance.State the null and alternative hypotheses.Determine critical value. Calculate value of test statistic. Round your answer to two decimal places.State conclusions Which rational expression is equivalent to this expression?4/x-3. A) X-3/x+2x+2/4. B) X-3/x+2/ 4/x+2. C) x+2/x-3 4/x+2. D) x+2/x-3/ 4/x+2 The Above Contour Map Is Given For A Function F(X,Y). Use It To Estimate The Value Of The Partial Derivatives Fx(2, 1) And Fy(2, 1). Copolymers are best described by which one of the following: An incident response team is following typical incident response procedures. Which of the following phases is the BEST choice foranalyzing an incident with a goal of identifying steps to prevent areoccurrence of the incident?answer choicesPreparationIdentificationEradicationLessons learned What is the wealth gap caused by? WHAT WAS THE EARLY STATEHOOD MOVEMENT? one characteristic of the usa patriot act of 2001 is that it . extends the tap and trace provisions of existing wiretap statutes to the internet makes it a violation of federal law to knowingly use another's identity implements the legal requirement that a signature, contract, or other record may not be deleted denies legal effect, validity, or enforceability solely because it is electronic form Which of the following is likely to occur as a result of new legislation regarding automobile safety?answer choicesThe Supreme Court will be asked to review the legislation annually.States will be empowered to begin automobile manufacturing.The Department of Transportation will be given discretionary authority to create auto regulations.Mandatory spending will be required in all future federal budgeting for the program. question 2 repeat the problem above, but use a capacitor that has half of the physical area, a, of the original one.